date
Model D 2 PRO 4k/8kHz Edition Firmware Update
Version 01.00.15.00
• Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference
• Fixed an issue where firmware defaults could overwrite configured settings
2024-01-10
Model O 2 PRO 4k/8kHz Edition Firmware Update
Version 01.00.15.00
• Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference
• Fixed an issue where firmware defaults could overwrite configured settings
2024-01-10
Model D 2 PRO Firmware Update
Version 01.00.08.00
• Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference
• Fixed an issue where firmware defaults could overwrite configured settings
2024-01-10
Model O 2 PRO Firmware Update
Version 01.00.08.00
• Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference
• Fixed an issue where firmware defaults could overwrite configured settings
2024-01-10
CORE Version 1.1.36
Updates
• Increased maximum standby time from 15 minutes to 60 minutes for GMMK Numpad
• Minor copy updates
Bugs
• Fixed an issue with PRO mice where default settings could overwrite previously saved settings, and previous settings may not have been applied after a device reset.
• Fixed an intermittent issue preventing firmware updates from completing successful for PRO mice
• Fixed a minor tooltip display issue for GMMK PRO
• Fixed an issue preventing the Back and Forward key from being used in a macro
New Features
• New firmware update notifications for PRO mice
2024-01-10
Model O 2 Wireless Firmware Update
Version 0259
- Fixed an issue preventing RGB lighting from working when switching profiles
- Added an LED Off stage to lighting effect button combo
- Fixed an issue where the mouse could reboot if connected via USB while the wireless receiver is disconnected
- Fixed an issue where RGB lighting would turn off prior to the configured inactivity timer setting
- • Fixed an issue where macros containing an LMB assignment can release any other buttons being held down while the macro is running
2023-11-29
Model D 2 PRO Firmware Update
Version 01.00.05.00
• Fixed an issue where the mouse could disconnect when encountering wireless interference
2023-10-21
Model O 2 PRO Firmware Update
Version 01.00.05.00
• Fixed an issue where the mouse could disconnect when encountering wireless interference
2023-10-21
Model D 2 PRO 4k/8kHz Edition Firmware Update
Version 01.00.09.00
• Fixed an issue where the mouse could disconnect when encountering wireless interference
2023-10-21
Model O 2 PRO 4k/8kHz Edition Firmware Update
Version 01.00.09.00
• Fixed an issue where the mouse could disconnect when encountering wireless interference
2023-10-21
Model D 2 PRO Firmware Update
Version: 01.00.03.00
• Performance improvements made for more accurate battery readings
• Performance improvements made for DPI change using the DPI button
• Fixed an issue preventing the battery charging icon from displaying when switching from USB to 2.4GHz mode
• Fixed an issue where an assigned macro button could become stuck
2023-10-17
Model O 2 PRO 4k/8kHz Edition
Version 01.00.07.00
• Performance improvements made for DPI change using the DPI button
• Fixed an issue where the Left Mouse Button could actuate on DPI Button press
• Fixed an issue involving the default DPI value
• Fixed an issue where toggling the mouse factory reset combo would also enter pairing mode
2023-10-17
Model O 2 PRO Firmware Update
Version 01.00.03.00
• Performance improvements made for more accurate battery readings
• Performance improvements made for DPI change using the DPI button
• Fixed an issue preventing the battery charging icon from displaying when switching from USB to 2.4GHz mode
• Fixed an issue involving the default DPI value
• Fixed an issue where an assigned macro button could become stuck
2023-10-17
CORE Version 1.1.35
Updates
• Device support for Model O 2 PRO
• Device support for Model D 2 PRO
• Device support for Model O 2 PRO 4k/8k Edition
• Device support for Model D 2 PRO 4k/8k Edition
• Implemented new firmware update flow
• Revised mouse pairing instructions and process flow
• Revised Audio Source and Audio Toggle text for accuracy
• Updated the default software debounce setting for Model I 2 Wireless to 2ms
Bugs
• Fixed an issue with persistent Model I and GMMK Numpad firmware update notifications
• Fixed an issue preventing the Launch Website shortcut from opening the correct URL
• Fixed an issue preventing the loading icon from displaying after saving settings
2023-10-16
Model I 2 Wireless Firmware Update
Version 0036
• Fixed an issue where CORE's inactivity timer would not be applied when the host PC is turned off
• Fixed an issue with LOD detection that would cause the DPI light to remain on or flicker
• Fixed an issue where DPI+ button could not be applied as a key binding
• Fixed an issue where holding the Home and the DPI + button would cause the battery indicator to activate
• Fixed an issue where continuously pressing down the DPI- button while not in Bluetooth mode would sometimes cause the DPI to remain stuck on the green stage
2023-08-17
CORE Version 1.1.34
Updates
• General performance improvements
• Reduced resource utilization
• CORE will now display the correct default lighting effect when plugging in a mouse for the first time
• More than four devices can now be displayed on the home screen
Bugs
• Fixed an incorrect device reference for GMMK 2 in tooltips
• Fixed an issue with applying per key lighting effects to GMMK 2
• Fixed an issue where the inactivity timer would not work for GMMK Numpad
• Fixed an issue where the Digital Times lighting effect was incorrectly named
• Fixed an issue where using the back button on a mouse would display a blank home screen
• Fixed an issue where the Numpad battery icon would not be displayed if the Bluetooth switch was toggled while plugged in via USB
• Fixed an issue where imported macros were not displayed in the macro list
• Fixed an issue where Reset to Default would not apply the default lighting effect to the device render
• Fixed an issue where Left Click was inadvertently included when recording a macro
• Fixed an issue where device settings could be reset when starting CORE
• Reduced occurrences of macro recordings requiring multiple save attempts to be applied