Product Guide Model D 2 Wireless


Model D 2 Wireless

Guide for the Glorious Model D 2 Wireless mouse

Getting Started


What's in the Box?

• 1× Model D 2 Wireless

• 2x Feet Extensions

• 1x Type-A to Type-C Paracord Charging Cable

• 1x 2.4 GHz Wireless Receiver

• 1x Wireless Extender Dongle

Glorious mice come with blue protective film on the G-Skates mouse feet in order to protect them. Ensure you remove these coverings before use.

Plug & Play

We recommend fully charging your mouse before using it for the first time in wireless mode. The mouse can be used normally in wired mode. Total charge time from zero to full battery is approximately 2 hours.

Plug the USB-A end of the Ascended cord into your PC and the USB-C end into the USB-C port located on the front of the mouse, symbol side up. The mouse will automatically install all necessary drivers.

Wireless USB Receiver

Once the mouse is fully charged, toggle the switch on the bottom of the mouse to "2.4" and plug the USB Receiver into any available USB port on your PC. It is paired with the mouse out of the box and should be kept at close range for optimal performance.

Wireless Bluetooth

Once the mouse is fully charged, toggle the switch at the bottom of the mouse to “BT.” Press and hold the DPI button and both side buttons until the LEDs flash blue to indicate that the mouse is discoverable. The mouse will show as “Model D 2” on your PC. Follow the instructions on your PC to successfully pair the mouse via Bluetooth. Once successfully paired, the mouse will discontinue flashing blue and revert to its previous lighting effect.

Bluetooth connectivity requires a PC with built-in Bluetooth or an external Bluetooth adapter (purchased elsewhere).

System Requirements

• Available USB port

• Windows 7+, MacOS, Linux


Glorious CORE 2.0

Instructions for downloading Glorious CORE 2.0 are available at the link below. This software is not required to use the mouse, but is needed to unlock a fully customizable experience - create custom macros, rebind mouse functions, unlock the full RGB color palette, and save personalized DPI settings.

(Windows OS only)

Forward navigation arrow

Glorious CORE 2.0 Download

Mouse Layout

The Model D 2 Wireless is an ergonomic mouse with 6 buttons, including a pressable scroll wheel and two side buttons.

Model D 2 Wireless mouse button diagram

Default DPI Levels

The DPI Indicator on the bottom of the mouse will show a color to reflect which DPI level is currently active. Cycle through DPI levels by pressing the DPI Button located behind the scroll wheel.

DPI values, the default DPI level, and the colors used to indicate levels can be customized in the Glorious CORE 2.0 software.

400 DPI


800 DPI


1600 DPI (Default)


3200 DPI


Lighting Effects

The Model D 2 Wireless has built-in LED effects that can be changed using the button combinations below. More RGB options are available in Glorious CORE 2.0.

Button Combinations

Change Lighting Effect

Middle + Forward + DPI

Adjust Brightness

Middle + DPI + Right Mouse Button

Adjust Speed

Middle + DPI + Back

Change Color

Middle + DPI + Left Mouse Button

Lighting Effects

Glorious Mode (Default)

5 Brightness Levels;

3 Speeds

Seamless Breathing (RGB)

5 Brightness Levels;

3 Speeds

Breathing (RGB)

5 Brightness Levels;

3 Speeds

Single Color

5 Brightness Levels;

No Speed;

7 Colors

Breathing (Single Color)

5 Brightness Levels;

3 Speeds;

7 Colors


5 Brightness Levels;

3 Speeds


5 Brightness Levels;

3 Speeds


5 Brightness Levels;

3 Speeds

LEDs Off

(LEDs Turn Off)


When the Model D 2 Wireless is low on power, the LEDs will shut off, except for one LED in the left strip, which will blink red to indicate that the mouse should be plugged in to charge.

The battery level can be checked in wireless mode by pressing and holding the DPI button. The RGB strips will blink in the color corresponding to the battery level. This can be disabled by pressing and holding the DPI button again. Battery level can also be found in the Glorious CORE 2.0 software.

0-25% Battery

Red LEDs

26-60% Battery

Orange LEDs

61-90% Battery

Yellow LEDs

91-100% Battery

Green LEDs

Note that the battery life of the mouse is negatively impacted by the brightness of the lighting. The brightness can be adjusted via the button combination described above in Lighting Effects or through Glorious CORE 2.0.

Product Specs

Model O 2 Wireless


66g ± 3g


Glorious BAMF 2.0 26K Optical Sensor

Battery Life

110 Hours (2.4GHz);

210 Hours (Bluetooth 5.2 LE)

**RGB Off


6 Remappable

Max Sensitivity

26,000 DPI

Max Speed

650 IPS

Max Acceleration


Max Polling Rate

1000Hz (1ms) (Default)

Lift Off Distance

1-2 mm (Adjustable with Software)

1 mm Default

Adjustable Debounce Time

0-16 ms (Adjustable with Software)

2ms Default

On-Board Storage

3 Custom Profiles


16.8 Million Color RGB


Glorious CORE 2.0 (optional)


Windows, MacOS, Linux

Reset to Factory Default

The Model D 2 Wireless can be restored to factory settings by pressing and holding the left, right, and scroll click buttons for 5 seconds. The LEDs will flash green to indicate that the settings are being reset.

This action will erase all custom profile information from the mouse.

Additional Links


Questions or concerns regarding your Glorious mouse can be directed to our support team.

Forward navigation arrow



Important Notices

• 2-year limited manufacturer warranty

• Warranty does not cover damages resulting from opening the mouse.

• Keep out of reach of children below the age of 10.

Forward navigation arrow

View Full Warranty Info

Product Registration

Registering your product extends the warranty by an additional year (free of charge) on eligible devices. To be eligible, register your device within 365 days of date of purchase.

Forward navigation arrow

Register Your Product