SUPPORT

Development Changelog

2025-02-06

Release Notes 2.1.5

  • Added and fixed issues related to the all GMMK3 firmware update process.
  • Fixed an issue where users were getting notified that their device cable and/or USB receiver were not plugged in.
  • Fixed an issue where users were getting incorrectly notified that their board still required an update.
  • Fixed an issue were some update drivers were not being properly shutdown or cleared after a firmware update for the GMMK3 HE.
  • Validated and fixed firmware configuration issues on the server for all Glorious products.

Please note that users must reset CORE after their FW update in order to see the changes take effect*

2024-10-28

CORE Version 2.1.3.4

Bug Fixes

  • Fixed an issue preventing firmware updates from completing successfully for GMMK 3 HE and GMMK 3 HE PRO devices
  • Fixed an issue where the global standby timer setting was non function for GMMK 3, GMMK 3 HE, GMMK 3 PRO, and GMMK 3 HE PRO devices
  • Fixed an issue where interacting with layers would cause the device profile to change
  • Fixed an issue where mouse button clicks were non functional in macros
  • Fixed an issue for binding modifier keys to mouse buttons
  • Fixed an issue where it was not possible to map CTRL on Model I 2 Wireless
  • Fixed an issue where update notifications would persist even after updating
  • GMMK 3 PRO HE 100% Wireless Doesn't Show FW Version When Connected Via BT
  • Fixed an issue where the battery charge would always display as 100% for mice
  • Fixed various keybinding issues for GMMK 2 and GMMK PRO
  • Fixed a device recognition issue for GMMK 2 96% ANSI
  • Fixed an issue preventing battery readings from properly updating for v2 mice family

2024-10-28

GMMK 3 HE Firmware Updates

GMMK 3 PRO HE 65% Wireless ANSI v103-200-105-107

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 65% ANSI v103-200-103

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings
  • Fixed issue where active lighting zones were not maintained on reconnection

GMMK 3 PRO HE 75% Wireless ANSI v103-200-102-105

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 75% ANSI v104-200-103

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings
  • Fixed issue where active lighting zones were not maintained on reconnection

GMMK 3 PRO HE 100% Wireless ANSI v104-200-105-105

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 100% ANSI v104-200-105

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 65% Wireless ISO vv104-200-100-107

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 65% ISO v104-200-102

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings
  • Fixed issue where active lighting zones were not maintained on reconnection

GMMK 3 PRO HE 75% Wireless ISO v104-200-101-105

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 75% ISO v104-200-101

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 100% Wireless ISO v104-200-101-105

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 PRO HE 100% ISO v104-200-101

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 HE 65% ANSI v103-200-104

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings
  • Fixed issue where active lighting zones were not maintained on reconnection

GMMK 3 HE 75% ANSI v103-200-103

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings
  • Fixed issue where active lighting zones were not maintained on reconnection

GMMK 3 HE 100% ANSI v104-200-104

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 HE 65% ISO v104-200-102

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 HE 75% ISO v104-200-101

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

GMMK 3 HE 100% ISO v104-200-101

  • Improvements to HE switch settings and calibration display in CORE
  • Improvements to Polling Rate settings

2024-09-27

GMMK 3 Firmware Updates

GMMK 3 MX 75% ANSI firmware version 0009
GMMK 3 MX 100% ANSI firmware version 0009

  • Added Standby Mode
  • Added 0 MS debounce support
  • Layer 1 is now the default when switching Profiles
  • Fix for FN + F12 not working as Print Screen
  • Change Default Lighting Effect for Layer 2 and 3 to Glorious Mode

2024-09-24

GMMK 3 Firmware Updates

GMMK 3 PRO MX 100% ANSI FW v023

  • Added Standby Mode
  • Added 0 MS debounce support
  • Change Default Lighting Effect for Layer 2 and 3 to Glorious Mode
  • Layer 1 is now the default when switching Profiles
  • Fix for FN + F12 not working as Print Screen

GMMK 3 PRO MX 65% Wireless ANSI FW v3037

  • Fixed an issue where the Bluetooth profile would switch to a different profile after a reset to default
  • Fixed an issue where the badge LED would flash red after switching to a wired connection
  • Fixed an issue where holding down the FN key would cause RGB to flash on the 4 key


GMMK 3 MX 65% ANSI FW v0010

  • Added 0 MS debounce support

2024-09-23

CORE Version 2.1.1.0

  • Restored Global Inactivity functionality for v2 mice family
  • Updated toggle key tooltip and description.
  • Restored key binding test area for DKS and toggle-key based
  • Updated DPI lock to use min and max values for validation
  • Fixed issue with profile delete button not working
  • Updated DPI rounding to use device-specific values
  • Fixed mouse function value names on keybinding page
  • Fixed typo on calibration modal
  • Implemented fix to prevent erroneous profile state when cycling through profiles
  • Fixed initialization issues with per key lighting layouts
  • Fixed issue with per key lighting settings not being applied for certain devices
  • Updated polling device settings for GMMK 3 MX boards to allow for sub 1000 Hz values.

2024-09-18

GMMK 3 Firmware Updates

Released for the following models:

  • GMMK 3 PRO 100% Wireless, firmware version 1037
  • GMMK 3 PRO 75% Wired, firmware version 021
  • GMMK 3 PRO 65% Wired, firmware version 021


Updates

  • Added Standby Mode
  • Added 0 MS debounce support
  • Change Default Lighting Effect for Layer 2 and 3 to Glorious Mode
  • Layer 1 is now the default when switching Profiles
  • Fix for FN + F12 not working as Print Screen

2024-09-16

CORE 2.1.03

Updates

  • Adjustments to firmware update process for GMMK 3 PRO HE boards
  • Added debounce options for GMMK 3 HE and GMMK 3 HE PRO boards

Bug Fixes

  • Added 8k Polling Rate option for GMMK 3 HE boards
  • Removed debug text from the Settings screen
  • Fixed issue with DPI lock validation

CORE 2.1.0

Updates

  • Added MacOS support.
  • Added support for GMMK 3, GMMK 3 HE, GMMK 3 PRO, and GMMK 3 PRO HE.
  • Updated Feature Request link
  • Added white colorway renders for Model O 2 PRO, Model O 2 PRO 4k/8k Edition, Model D 2 PRO, and Model D 2 PRO 4k/8k Edition.
  • Various UI/UX updates

Bug Fixes

  • Fixed an issue where the application would not open after launching the application.
  • Fixed occurrences of JavaScript errors that could occur when opening the application.
  • Fix an issue where Model O Wireless would not be detected by the application.
  • Reduced occurrences of firmware update failures that required multiple attempts to complete successfully.
  • Fixed an issue where the application would remain isolated to the system tray which prevented the application from fully opening.
  • Fixed an issue where the application would launch on startup when the option was toggled Off in settings.
  • Fixed an issue where the application would fail to initialize connected devices.
  • Fixed occurrences of key binding and lighting effects not being applied after saving.
  • Fixed an issue where switching between device profiles was not accurately represented in the UI.
  • Greatly reduced occurrences of application crashes.
  • Fixed an issue where it was not possible to delete characters from a saved macro.
  • Fixed an issue where the application would reinitialize all connected devices if a keyboard was connected after the application was already open.
  • Fixed various saving issues.
  • Fixed issue with ISO number keys not binding on the GMMK 2 96%.
  • Fixed issue with unexpected behavior when using certain wired mouse devices to change their profiles.

Model D 2 PRO 4k/8kHz Edition Firmware Update

Version 01.00.15.00

•  Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference

•  Fixed an issue where firmware defaults could overwrite configured settings

2024-01-10

Model O 2 PRO 4k/8kHz Edition Firmware Update

Version 01.00.15.00

•  Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference

•  Fixed an issue where firmware defaults could overwrite configured settings

2024-01-10

Model D 2 PRO Firmware Update

Version 01.00.08.00

•  Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference

•  Fixed an issue where firmware defaults could overwrite configured settings

2024-01-10

Model O 2 PRO Firmware Update

Version 01.00.08.00

•  Further enhancements to improve wireless performance and prevent device disconnects when encountering wireless interference

•  Fixed an issue where firmware defaults could overwrite configured settings

2024-01-10

CORE Version 1.1.36


Updates
• Increased maximum standby time from 15 minutes to 60 minutes for GMMK Numpad
• Minor copy updates

Bugs
• Fixed an issue with PRO mice where default settings could overwrite previously saved settings, and previous settings may not have been applied after a device reset.
• Fixed an intermittent issue preventing firmware updates from completing successful for PRO mice
• Fixed a minor tooltip display issue for GMMK PRO
• Fixed an issue preventing the Back and Forward key from being used in a macro

New Features
• New firmware update notifications for PRO mice

2024-01-10

Model O 2 Wireless Firmware Update

Version 0259

  • Fixed an issue preventing RGB lighting from working when switching profiles
  • Added an LED Off stage to lighting effect button combo
  • Fixed an issue where the mouse could reboot if connected via USB while the wireless receiver is disconnected
  • Fixed an issue where RGB lighting would turn off prior to the configured inactivity timer setting
  • • Fixed an issue where macros containing an LMB assignment can release any other buttons being held down while the macro is running

2023-11-29

Model D 2 PRO Firmware Update

Version 01.00.05.00

• Fixed an issue where the mouse could disconnect when encountering wireless interference

2023-10-21

Model O 2 PRO Firmware Update

Version 01.00.05.00

• Fixed an issue where the mouse could disconnect when encountering wireless interference

2023-10-21

Model D 2 PRO 4k/8kHz Edition Firmware Update

Version 01.00.09.00

• Fixed an issue where the mouse could disconnect when encountering wireless interference

2023-10-21

Model O 2 PRO 4k/8kHz Edition Firmware Update

Version 01.00.09.00

• Fixed an issue where the mouse could disconnect when encountering wireless interference

2023-10-21

Model D 2 PRO Firmware Update

Version: 01.00.03.00

• Performance improvements made for more accurate battery readings

• Performance improvements made for DPI change using the DPI button 

• Fixed an issue preventing the battery charging icon from displaying when switching from USB to 2.4GHz mode

• Fixed an issue where an assigned macro button could become stuck

2023-10-17

Model O 2 PRO 4k/8kHz Edition

Version 01.00.07.00

• Performance improvements made for DPI change using the DPI button 

• Fixed an issue where the Left Mouse Button could actuate on DPI Button press

• Fixed an issue involving the default DPI value

• Fixed an issue where toggling the mouse factory reset combo would also enter pairing mode

2023-10-17

Model O 2 PRO Firmware Update

Version 01.00.03.00

• Performance improvements made for more accurate battery readings

• Performance improvements made for DPI change using the DPI button 

• Fixed an issue preventing the battery charging icon from displaying when switching from USB to 2.4GHz mode

• Fixed an issue involving the default DPI value

• Fixed an issue where an assigned macro button could become stuck

2023-10-17

CORE Version 1.1.35

Updates
• Device support for Model O 2 PRO
• Device support for Model D 2 PRO
• Device support for Model O 2 PRO 4k/8k Edition
• Device support for Model D 2 PRO 4k/8k Edition
• Implemented new firmware update flow
• Revised mouse pairing instructions and process flow
• Revised Audio Source and Audio Toggle text for accuracy
• Updated the default software debounce setting for Model I 2 Wireless to 2ms

Bugs
• Fixed an issue with persistent Model I and GMMK Numpad firmware update notifications
• Fixed an issue preventing the Launch Website shortcut from opening the correct URL
• Fixed an issue preventing the loading icon from displaying after saving settings

2023-10-16

Model I 2 Wireless Firmware Update

Version 0036

•  Fixed an issue where CORE's inactivity timer would not be applied when the host PC is turned off

•  Fixed an issue with LOD detection that would cause the DPI light to remain on or flicker

•  Fixed an issue where DPI+ button could not be applied as a key binding

•  Fixed an issue where holding the Home and the DPI + button would cause the battery indicator to activate

•  Fixed an issue where continuously pressing down the DPI- button while not in Bluetooth mode would sometimes cause the DPI to remain stuck on the green stage

2023-08-17

CORE Version 1.1.34

Updates
• General performance improvements
• Reduced resource utilization
• CORE will now display the correct default lighting effect when plugging in a mouse for the first time
• More than four devices can now be displayed on the home screen

Bugs
• Fixed an incorrect device reference for GMMK 2 in tooltips
• Fixed an issue with applying per key lighting effects to GMMK 2
• Fixed an issue where the inactivity timer would not work for GMMK Numpad
• Fixed an issue where the Digital Times lighting effect was incorrectly named
• Fixed an issue where using the back button on a mouse would display a blank home screen
• Fixed an issue where the Numpad battery icon would not be displayed if the Bluetooth switch was toggled while plugged in via USB
• Fixed an issue where imported macros were not displayed in the macro list
• Fixed an issue where Reset to Default would not apply the default lighting effect to the device render
• Fixed an issue where Left Click was inadvertently included when recording a macro
• Fixed an issue where device settings could be reset when starting CORE
• Reduced occurrences of macro recordings requiring multiple save attempts to be applied