PRODUCT GUIDE

GHS Wireless InfinitePlay Audio Headset

What's in the Box

  • 1× GHS Wireless InfinitePlay Headset 
  • 1× 2.4GHz Wireless Dongle 
  • 1× Base Station 
  • 1× Replaceable InfinitePlay Battery Pack (spare) 
  • 1× Detachable Microphone Boom 
  • 1× USB-C to USB-C Cable 
  • 1× USB-C to USB-A Adapter 
  • 1× Quick Start Guide 

Getting Started

Plug & Play 

Primary – 2.4GHz 

Insert the dongle into the rear of the base station, then connect a USB-C cable from the base station to an available USB-C port on your PC or console. Use the included USB-C to USB-A adapter if only a USB-A port is available. 

The dongle can also be used without the base station by plugging it directly into a USB-C (or USB-A, via adapter) port on your PC or console. 

On initial use, the dongle's LED will blink blue until it automatically connects to the headset. Once connected, the dongle LED shows the current InfinitePlay battery status and the left ear cup LED briefly flashes white. 

Secondary – Bluetooth 

Press and hold the button on the lower part of the right ear cup. The headset will announce it has entered pairing mode. Select “GHS Wireless InfinitePlay” on your device to connect. Repeat to connect to another device. 

Third – USB-C 

Connect a USB-C cable to the port on the bottom of the left ear cup and to your PC, PlayStation, Switch, Apple, or Android device. The headset must be powered on to be used; if powered off, it will charge from the connected device. 


System Requirements 

- Available USB-C or USB-A port 

- Bluetooth-enabled device (for Bluetooth mode) 

- Windows 10+, macOS, Linux, Android, PlayStation, Xbox, Switch 

Software

Glorious CORE 

Download Glorious CORE to change RGB settings, choose EQ presets, adjust microphone settings, save personalized configurations, and update your headset firmware.

Customized settings are saved to your device once you click “Save Changes,” so you can enjoy them on any other PC, laptop, console, or mobile device. 

Forward navigation arrow

Download CORE 2.1

Headset Layout

Size Adjustment 

The size and fit of your GHS Wireless InfinitePlay can be adjusted while worn or off your head. The suspension headband and ear cup angle automatically adjust to fit you. To fine-tune ear cup height, firmly hold the headband and gently push or pull each ear cup up or down until you find the most comfortable, optimal fit for the angled drivers.

Controls

Left Rotary Knob + Button

Power On/Off

Press and hold 3 seconds. LED flashes white before showing battery status.

Profile Change

Two short presses (<1 sec each) enters profile selection mode; rotate to browse profiles (set in Glorious CORE); two short presses to confirm within 15 seconds, or the change is abandoned.

Battery Status

One short press displaysInfinitePlaybattery status via LED and voice announcement.

Game/Chat Mix (2.4GHz mode only)

Rotate clockwise for more chat volume, counterclockwise for more game volume.

Battery Status LED Colors

Green

100%

Yellow

31-99%

Red

0-30%

Right Rotary Knob + Button

Volume

Rotate clockwise to increase, counterclockwise to decrease.

Answer Call

One short press (<1 sec)

Reject Call

One long press (3 sec)

End Call

One short press (<1 sec)

Play / Pause

One short press (<1 sec)

Skip Track Forward

Two short presses

Skip Track Back

Three short presses

•  Note: The microphone must be unmuted to use call and media controls.

Microphone Mute

Mute Microphone

One short press. Microphone LED turns red.

Unmute Microphone

One short press. Microphone LED turns off

Dongle Pairing

Within 30 seconds of power-on, hold for 3 seconds to enter 2.4GHz dongle pairing mode.

Source Selection + Bluetooth

Switch Source

One short press toggles between 2.4GHz and Bluetooth.

Bluetooth Pairing

One long press (3 sec) until you hear “Bluetooth pairing.”

Clear Paired Devices

Press and hold 6 seconds until a tone and “Bluetooth pairing” prompt is heard.

Blue LED On

Bluetooth connected; flashing = pairing mode; off = disconnected.

•  Note: while connected via USB cable, Bluetooth and this button are unavailable.

Battery, Dongle + Base Station

InfinitePlay Battery

Swap

Press the orange surface of the battery into the ear cup and release to eject; insert the replacement with the orange surface facing outward and slide in until it clicks.

Charge via USB

Connect USB-C to the port on the bottom of the left ear cup. The headset can be used while charging but must be powered on.

Removable Microphone Boom

Install

Align the 3.5mm plug with the port in the lower front corner of the left ear cup, mic housing pointed toward your mouth, and press fully in until the rubber over-mold is seated.

Remove

Grasp the rubber over-mold and pull straight away from the ear cup.

Dongle 

To pair a new dongle or restore the connection, press and hold the dongle button for 3 seconds until its LED blinks white (headset must be in 2.4GHz pairing mode). Once paired, the LED briefly shows white, then battery status (Green 100%, Yellow 31–99%, Red 0–30%). 

Base Station

USB Connection

Connect USB-C to the rear port for fast charging (use the USB-C to USB-A adapter if needed; charging may be slower).

Dongle Slot

Insert the dongle in the rear slot for full wireless connectivity while the base station is connected to your PC.

Battery Charging

Insert a spare InfinitePlay battery into the front slot until it clicks; press to release.

Status LEDs

Show headset battery status, dongle connection, and base station charging status (Green/Yellow/Red for charge level; White for base station power/charging; Blue flash = dongle connecting).

Product Specs

Headphones

Nominal Impedance

32 Ω

Speaker Driver

40mm

Total Harmonic Distortion

≤1% @1 kHz

Voltage Regulation

3.85V

Weight (with Mic)

255g

Dimensions

H 80mm× W 175mm× L 200mm

Battery

Keep-Alive Fixed Cell

45mAh/ 3.7V

Replaceable InfinitePlay Pack

1280mAh/ 3.85V

Microphone

Type

Omnidirectional Detachable

Frequency Response

70 Hz – 10 kHz

Sensitivity

-40 dB @ 1 kHz

Connectivity

Connectivity

2.4GHz Wireless, Bluetooth, USB Wired

Bluetooth Version

5.4

Frequency Band

2.402GHz – 2.480GHz

Maximum RF Power

≤9dBm

Minimum Range

10 meters

Cable Type

USB-C to USB-C

General

Operating Temperature

0–45°C

Storage Temperature

-20–45°C; Humidity < 95% RH

Warranty

2 Years (3 Years with Product Registration)

Reset to Factory Default 

To reset the GHS Wireless InfinitePlay to factory settings, connect the headset to your computer and open Glorious CORE. The factory reset option is on the “General” page. 

⚠️ This action will erase all custom profile information and reset all settings to default. 

Maintenance

Wipe dirty surfaces with a lightly damp cloth and allow to dry. Do not use chemical cleaners or run the product under water. Clean dust, debris, and sand with a soft brush.

Support

Questions or concerns regarding your Glorious headset can be directed to our support team.



Important Notices

  • 2-year limited manufacturer warranty
  • Warranty does not cover damages resulting from misuse.
  • Keep out of reach of children below the age of 10.

Support

Product Registration

Registering your product extends the warranty by an additional year (free of charge) on eligible devices. To be eligible, register your device within 365 days of the date of purchase.

Register Your Product