Product Guide - Model I Wired


Model I Wired

Getting Started


What's in the Box?

• 1× Glorious Model I Wired Gaming Mouse

Glorious mice come with blue protective film on the G-Skates mouse feet in order to protect them. Ensure you remove these coverings before use.

Plug & Play

Connect the mouse to an available USB port and the mouse will automatically install all necessary drivers.

System Requirements

• Available USB port

• Windows 7+, MacOS, Linux


Glorious CORE

Instructions for downloading Glorious CORE are available at the link below. CORE is not required to use the mouse, but is needed to unlock a fully customizable experience - unlock the full RGB color palette, create macros, remap mouse buttons, and personalize DPI settings. (Windows OS only)

Forward navigation arrow

Glorious CORE Download

Mouse Layout

The Model I Wired is an ergonomic mouse with a thumb rest and nine buttons, including a pressable scroll wheel and four side buttons.

Model I Wired mouse top and left side views with buttons labelled

Default DPI Levels

The DPI Indicator on the bottom of the mouse will show a color to reflect which DPI level is currently active. Cycle through DPI levels by pressing the DPI Button located behind the scroll wheel.

DPI values, the default DPI level, and the colors used to indicate levels can be customized in Glorious CORE software.

400 DPI


800 DPI


1600 DPI (Default)


3200 DPI


Side Buttons

DPI Focus Button

The DPI Focus button is the larger side button near where your thumb rests on the mouse, below the other three side buttons. Pressing and holding this button will temporarily change the DPI of your mouse. The default DPI Focus is 400 DPI.

This setting can be changed in Glorious CORE under the "Key Binding" tab. This function can also be bound to any other mouse button as desired by using CORE.

Swappable Magnetic Buttons

The Model I has four total buttons on the left side. Two of these buttons are magnetic and removable, allowing you to change their shape to compliment your play style.

Left side view of mouse showing placement of the swappable buttons

The first removable button is the DPI Focus button, located near where your thumb rests below the other three side buttons.

The second removable button is located at the rear of the group of three side buttons.

Removing a Magnetic Side Button

1. There is a small groove at the front of the button. Place your finger or fingernail into this opening.

2. Lightly lift your finger and the button away from the side of the Model I. Since the buttons are magnetic, you will feel a small amount of resistance as you do this.

3. The magnetic button should begin to slowly pull away from the mouse and lift from the slot. Do this slowly and carefully to ensure that the button does not fly out of your hand and get lost.

Installing a Magnetic Side Button

1. Select your preferred mouse button shape from the three provided options.

2. Looking at the button interior, you will notice two posts that help it attach to its respective magnetic slot. The first post is flat & horizontal. The second is circular with a hole in the middle. Line up these posts with the matching holes in the empty button slot.

3. Insert the round post into the rear of the slot before inserting the front, horizontal post.

4. Once aligned, the magnets should pick up the replaceable button and snap it securely into place.

Lighting Effects

The Model I Wired has built-in LED effects that can be changed using the button combinations below. More RGB options are available in Glorious CORE.

Button Combinations

Change Lighting Effect


Middle + Button 4 + DPI+


Middle + Button 4 + DPI-

Adjust Brightness

Middle + DPI+ + Right Mouse Button

Adjust Speed

Middle + DPI+ + Button 5

Change Color

Middle + DPI+ + Left Mouse Button

Lighting Effects

Glorious Mode (Default)

4 Brightness Levels;

3 Speeds

Seamless Breathing (RGB)

4 Brightness Levels;

3 Speeds

Breathing (RGB)

4 Brightness Levels;

3 Speeds

Single Color

4 Brightness Levels;

No Speed;

7 Colors

Breathing (Single Color)

4 Brightness Levels;

3 Speeds;

7 Colors


4 Brightness Levels;

3 Speeds


4 Brightness Levels;

3 Speeds


4 Brightness Levels;

3 Speeds

LEDs Off

(LEDs Turn Off)

Product Specs

Model I Wired (V1)


69g ± 2.5g


Glorious BAMF Sensor

Switch Type (Main Buttons)

Glorious Mechanical Rated for 80 Million Clicks

Number of Buttons


Max Tracking Speed

400 IPS





Max Polling Rate

1000Hz (1ms) (Default)

Lift Off Distance

1-2 mm (Adjustable with Software)

1 mm Default

Debounce Time

4-16 ms (Adjustable with Software)

10 ms Default


USB 2.0

Reset to Factory Default

The Model I Wired can be restored to factory settings by pressing and holding the left, right, and scroll click buttons for 5 seconds. The LEDs will flash green to indicate that the settings are being reset.

This action will erase all custom profile information from the mouse.

Additional Links


Questions or concerns regarding your Glorious mouse can be directed to our support team.

Forward navigation arrow



Important Notices

• 2-year limited manufacturer warranty

• Warranty does not cover damages resulting from opening the mouse.

• Keep out of reach of children below the age of 10.

Forward navigation arrow

View Full Warranty Info

Product Registration

Registering your product extends the warranty by an additional year (free of charge) on eligible devices. To be eligible, register your device within 365 days of date of purchase.

Forward navigation arrow

Register Your Product